LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) >> Hose and Tube >> Installation

Hose and Tube: Installation

CAUTION:
  • When disconnecting or connecting the hoses, do not apply excessive force. After installing, check that no torsion or excessive tension applied to the hoses.
  • Seal the disconnected hose with a plug or vinyl tape to prevent foreign matter from entering.
  1. Install in the reverse order of removal.
  2. Charge refrigerant. < Ref. to PROCEDURE , Refrigerant Charging Procedure. >

    Tightening torque:  Refer to "COMPONENT " of "General Description". < Ref. to AIR CONDITIONING UNIT , COMPONENT, General Description. >