LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Emission Control (Aux. Emission Control Devices) (H4SO)) >> Purge Control Solenoid Valve >> Removal

Purge Control Solenoid Valve: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  2. Disconnect the connector and evaporation hose of the purge control solenoid valve, then remove the purge control solenoid valve.
    Fig 2: Locating Purge Control Solenoid Valve Bolt
    G04997505
scientia non olet · About LEMON Manuals