Ignition Coil and Ignitor Assembly: Inspection
WARNING: This page is about a different variant/trim than selected.
Check the following items using a tester. Replace if defective.
Secondary coil resistance
CAUTION:
- If the resistance is extremely low, it indicates the presence of a short-circuit.
- Ignitor is integrated with the coil. Therefore the resistance of primary side coil cannot be measured.
Specified resistance:
[Secondary side]
Between (A) and (B)
11.2 kΩ±15%
Between (C) and (D)
11.2 kΩ±15%