LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection (Fuel Systems) (H4SO)) >> 4. Engine Coolant Temperature Sensor >> A: Removal

A: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586
  2. Remove the generator. < Ref. to REMOVAL , Generator. >
  3. Disconnect the connectors from the engine coolant temperature sensor.
    Fig 2: Identifying Connector For Engine Coolant Temperature Sensor
    G04997335
  4. Remove the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals