2. LH Side

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Fig 1: Identifying Fuel Injector Pipe Bolt

Tightening torque:

6.4 N.m (0.65 kgf-m, 4.7 ft-lb)

Fig 2: Locating Fuel Injector Pipe Bolts

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Locating Fuel Injector Pipe Bolts - LH Side

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 4: Locating Fuel Pipe Protector LH