1. RH Side

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Fig 1: Identifying Fuel Injector Pipe Bolt

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 2: Locating Fuel Injector Pipe Bolts - RH Side

Tightening torque:

19 N.m (1.9 kgf-m, 14.0 ft-lb)

Fig 3: Locating Fuel Pipe Protector RH