LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection (Fuel Systems) (H4SO)) >> 12.Fuel Injector >> A: Removal >> 2. LH Side

2. LH Side

WARNING: This page is about a different variant/trim than selected.
  1. Release the fuel pressure.

    < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >

  2. Remove the battery. < Ref. to REMOVAL , Battery. >
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Remove the spark plug cords from spark plugs (#2 and #4 cylinders).
  5. Remove the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector LH
    G04997360
  6. Disconnect the connectors (A) from fuel injector.
  7. Remove the harness band (B) which holds the engine harness to injector pipe.
    Fig 2: Identifying Harness Band And Fuel Injector Connector
    G04997362
  8. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 3: Locating Fuel Injector Pipe Bolts - LH Side
    G04997366
    Fig 4: Locating Fuel Injector Pipe Bolts
    G04997367
  9. Remove the fuel injector while lifting up the fuel
scientia non olet · About LEMON Manuals