LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Automatic Transmission 5AT) >> Rear Drive Shaft >> Assembly

Rear Drive Shaft: Assembly

WARNING: This page is about a different variant/trim than selected.

Assemble in the reverse order of disassembly.

NOTE:
  • Use new ball bearings and revolution gear.
  • Make sure the clutch hub is facing the correct direction.
Fig 1: Identifying Ball Bearings And Revolution Gear
G05022307
scientia non olet · About LEMON Manuals