Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine coolant temperature | ≥ 75°C (167°F) |
| Battery voltage | ≥ 10.9 V |
| Atmospheric pressure | >75.1 kPa(563 mmHg, 22.2 inHg) |
| Fuel level | ≥ 9.0 l (2.38 US gal, 1.98 Imp gal) |
| After engine starting | ≥ 10.5 sec. |
| Feedback in ISC | In operation |
| Lambda value | 0.81 - 1.1 |
| After air condition switching ON-OFF, OFF-ON | > 5.1 sec. |
| After intake manifold pressure changes more than 4 kPa (30 mmHg, 1.2 inHg). | > 5.1 sec. |
| After neutral switch ON/OFF change | >5.1 sec. |
| Vehicle speed | 0 km/h (0 MPH) |