Enable Condition
WARNING: This page is about a different variant/trim than selected.
ENABLE CONDITION CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| After engine starting | 40 seconds or more |
| Engine coolant temperature | ≥ 75°C (167°F) |
| Engine speed | 1200 - 2950 rpm |
| Intake manifold pressure (absolute pressure) | < 40.0 kPa (300 mmHg, 11.81 inHg) |
| Ambient air temperature | ≥ 5°C (41°F) |
| Throttle position | < 0.25° |
| Battery voltage | > 10.9 V |
| Atmospheric pressure | ≥ 75.0 kPa (563 mmHg, 22.17 inHg) |
| Vehicle speed | ≥ 53 km/h (33 MPH) |
| Fuel shut-off function | In operation |
| Neutral switch | Over 1 second after changing from OFF and ON to OFF. |
| Load (A/C, power steering, lighting, rear defogger, heater fan and radiator fan) | No change for over 5 seconds. |