Oil Pressure Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

Three bond 1324 (Part No.004403042) or equivalent

Fig 1: Applying Liquid Gasket To Oil Pressure Switch Threads
Install the oil pressure switch onto engine block.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Identifying Oil Pressure Switch
Connect the terminal to the oil pressure switch.

Fig 3: Connecting Terminal Of Oil Pressure Switch
Install the generator to the bracket. < Ref. to INSTALLATION , Generator. >