Section 14 (Lubrication (H4SO)): General Description: Preparation Tool
WARNING: This page is about a different variant/trim than selected.
PREPARATION TOOL CHART
| ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
|---|---|---|---|
| 499977100 | CRANK PULLEY WRENCH | Used for stopping rotation of crank pulley when loosening and tightening the crank pulley bolt. | |
| 18332AA000 | OIL FILTER WRENCH | Used for removing and installing oil filter. (Outer diameter: 68 mm (2.68 in)) | |
| 18332AA010 | OIL FILTER WRENCH | Used for removing and installing oil filter. (Outer diameter: 65 mm (2.56 in)) | |
| 499587100 | OIL SEAL INSTALLER | Used for installing oil seal into oil pump. |