LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Cooling System (H4SO)) >> Water Pump >> Removal

Water Pump: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the radiator. < Ref. to REMOVAL , Radiator. >
  2. Remove the V-belts. < Ref. to REMOVAL , V-belt. >
  3. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  4. Remove the timing belt. < Ref. to TIMING BELT , REMOVAL, Timing Belt. >
  5. Remove the automatic belt tension adjuster.
    Fig 1: Removing Automatic Belt Tension Adjuster
    G04997824
  6. Remove the belt idler No. 2.
    Fig 2: Locating Belt Idler No. 2
    G04997825
  7. Remove the cam sprocket (LH) using ST.

    ST 18231AA010 CAM SPROCKET WRENCH

    NOTE: CAMSHAFT SPROCKET WRENCH (499207100) can also be used.
    Fig 3: Removing Cam Sprocket (LH) Using ST (18231AA010)
    G04997826
  8. Remove the belt cover (LH) No. 2.
    Fig 4: Locating Belt Cover No. 2 (LH) Bolts
    G04997827
  9. Remove the tensioner bracket.
    Fig 5: Identifying Tensioner Bracket
    G04997828
  10. Disconnect the hose from water pump.
  11. Remove the water pump.
    Fig 6: Removing Water Pump Bolt
    G04997829
scientia non olet · About LEMON Manuals