LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission 4AT) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the snap ring to reduction driven gear.
  2. Install the new ball bearing to reduction driven gear using press.
    Fig 1: Identifying Snap Ring
    G05021916Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to reduction driven gear.
    Fig 2: Identifying Snap Ring
    G05021917Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals