LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission 4AT) >> Parking Pawl >> Installation

Parking Pawl: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the parking pawl, return spring and shaft.
    Fig 1: Identifying Parking Pawl, Return Spring And Shaft
    G05021925Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction drive gear. < Ref. to INSTALLATION , Reduction Drive Gear. >
  3. Install the rear vehicle speed sensor and extension case. < Ref. to INSTALLATION , Extension Case. >
  4. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals