LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission 4AT) >> Oil Pump Housing >> Disassembly >> Oil Pump Cover

Oil Pump Cover

WARNING: This page is about a different variant/trim than selected.
  1. Remove the four seal rings.
    Fig 1: Locating Four Seal Rings
    G05021943Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the cover by lightly tapping the end of the stator shaft.
    Fig 2: Identifying Cover
    G05021944Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the inner and outer rotors.
    Fig 3: Identifying Inner And Outer Rotors
    G05021945Courtesy of SUBARU OF AMERICA, INC.