LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls - Engine (Diagnostics) (H4SO)) >> Subaru Select Monitor >> Operation >> V.I.N. Registration

V.I.N. Registration

WARNING: This page is about a different variant/trim than selected.
  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {VIN Registration} and press the [YES] key.
  5. Perform the procedure displayed on screen.
    NOTE: For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals