LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Timing Belt >> Removal >> Belt Idler And Automatic Belt Tension Adjuster Assembly

Belt Idler And Automatic Belt Tension Adjuster Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the belt idler (No. 1).
    Fig 1: Identifying Belt Idler (No. 1)
    G04988294Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the automatic belt tension adjuster assembly.
    Fig 2: Removing Automatic Belt Tension Adjuster Assembly
    G04997649Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals