LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Timing Belt >> Inspection >> Belt Tension Pulley

Belt Tension Pulley

WARNING: This page is about a different variant/trim than selected.
  1. Check the mating surfaces of timing belt and contact point of adjuster rod for abnormal wear or scratches. Replace the automatic belt tension adjuster assembly if faulty.
  2. Check the belt tension pulley for smooth rotation. Replace if noise or excessive play occurs.
  3. Check the belt tension pulley for grease leakage.
scientia non olet · About LEMON Manuals