RH Side

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake chamber.
< Ref. to REMOVAL , Air Intake Chamber. >
Remove the engine harness connector from the bracket.

Fig 2: Identifying Engine Harness Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the oil switching solenoid valve.
Remove the oil switching solenoid valve.
Remove the variable valve lift diagnosis oil pressure switch.
< Ref. to REMOVAL , Variable Valve Lift Diagnosis Oil Pressure Switch. >
Remove the oil temperature sensor.
< Ref. to REMOVAL , Oil Temperature Sensor. >
Remove the oil switching solenoid valve holder from the cylinder head.

Fig 3: Identifying Oil Switching Solenoid Valve Holder
Courtesy of SUBARU OF AMERICA, INC.