Special Tool

WARNING: This page is about a different variant/trim than selected.

SPECIAL TOOL CHART

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	18231AA010	CAM SPROCKET WRENCH	Used for removing and installing cam sprocket. CAMSHAFT SPROCKET WRENCH (499207100) can also be used.
Courtesy of SUBARU OF AMERICA, INC.	18482AA010	CARTRIDGE	Troubleshooting for electrical system.
Courtesy of SUBARU OF AMERICA, INC.	22771AA030	Subaru Select Monitor KIT	Troubleshooting for electrical system.
Courtesy of SUBARU OF AMERICA, INC.	498267800	CYLINDER HEAD TABLE	Used for replacing valve guides. Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for installing automatic transmission assembly to engine.
Courtesy of SUBARU OF AMERICA, INC.	498457000	ENGINE STAND ADAPTER RH	Used with ENGINE STAND (499817100).
Courtesy of SUBARU OF AMERICA, INC.	498457100	ENGINE STAND ADAPTER LH	Used with ENGINE STAND (499817100).
Courtesy of SUBARU OF AMERICA, INC.	498497100	CRANKSHAFT STOPPER	Used for stopping rotation of the flywheel when loosening/tightening crank pulley bolt.
Courtesy of SUBARU OF AMERICA, INC.	498747300	PISTON GUIDE	Used for installing piston in cylinder.
Courtesy of SUBARU OF AMERICA, INC.	498857100	VALVE OIL SEAL GUIDE	Used for press-fitting of intake and exhaust valve guide oil seals.
Courtesy of SUBARU OF AMERICA, INC.	499017100	PISTON PIN GUIDE	Used for installing piston pin, piston and connecting rod.
Courtesy of SUBARU OF AMERICA, INC.	499037100	CONNECTING ROD BUSHING REMOVER & INSTALLER	Used for removing and installing connecting rod bushing.
Courtesy of SUBARU OF AMERICA, INC.	499587200	CRANKSHAFT OIL SEAL INSTALLER	Used for installing crankshaft oil seal. Used with CRANKSHAFT OIL SEAL GUIDE (499597100).
Courtesy of SUBARU OF AMERICA, INC.	499587500	OIL SEAL INSTALLER	Used for installing the camshaft oil seal. Used with OIL SEAL GUIDE (499597000).
Courtesy of SUBARU OF AMERICA, INC.	499587700	CAMSHAFT OIL SEAL INSTALLER	Used for installing cylinder head plug.
Courtesy of SUBARU OF AMERICA, INC.	499097700	PISTON PIN REMOVER ASSY	Used for removing piston pin.
Courtesy of SUBARU OF AMERICA, INC.	499497000	TORX® PLUS	Used for removing and installing camshaft cap.
Courtesy of SUBARU OF AMERICA, INC.	499587100	OIL SEAL INSTALLER	Used for installing oil pump oil seal.
Courtesy of SUBARU OF AMERICA, INC.	499597000	OIL SEAL GUIDE	Used for installing the camshaft oil seal. Used with CAMSHAFT OIL SEAL INSTALLER (499587500).
Courtesy of SUBARU OF AMERICA, INC.	499597100	CRANKSHAFT OIL SEAL GUIDE	Used for installing crankshaft oil seal. Used with CRANKSHAFT OIL SEAL INSTALLER (499587200).
Courtesy of SUBARU OF AMERICA, INC.	499718000	VALVE SPRING REMOVER	Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	499767200	VALVE GUIDE REMOVER	Used for removing valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499767400	VALVE GUIDE REAMER	Used for reaming valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499767700	VALVE GUIDE ADJUSTER	Used for installing valve guides. (Intake side)
Courtesy of SUBARU OF AMERICA, INC.	499767800	VALVE GUIDE ADJUSTER	Used for installing valve guides. (Exhaust side)
Courtesy of SUBARU OF AMERICA, INC.	499817100	ENGINE STAND	Stand used for engine disassembly and assembly. Used with ENGINE STAND ADAPTER RH (498457000) & LH (498457100).
Courtesy of SUBARU OF AMERICA, INC.	499977100	CRANK PULLEY WRENCH	Used for stopping rotation of crank pulley when loosening/tightening crank pulley bolt.
Courtesy of SUBARU OF AMERICA, INC.	18482AA010	OIL FILTER WRENCH	Used for removing and installing oil filter. (Outer diameter: 68 mm (2.68 in))
Courtesy of SUBARU OF AMERICA, INC.	18482AA010	OIL FILTER WRENCH	Used for removing and installing oil filter. (Outer diameter: 65 mm (2.56 in))
Courtesy of SUBARU OF AMERICA, INC.	499987500	CRANKSHAFT SOCKET	Used for rotating crankshaft.
Courtesy of SUBARU OF AMERICA, INC.	42099AE000	CONNECTOR REMOVER	Used for removing the quick connector.
Courtesy of SUBARU OF AMERICA, INC.	18354AA000	VALVE ROCKER HOLDER	Used for installing the valve rocker assembly (intake). (2 sets)
Courtesy of SUBARU OF AMERICA, INC.	18258AA000	SPRING INSTALLER	Used for installing the valve rocker assembly (intake).