LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Engine Assembly >> Inspection

Engine Assembly: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Check that pipes, hoses, connectors and clamps are installed firmly.
  2. Check the engine coolant and ATF are at specified levels.
  3. Start the engine and check for exhaust gas, engine coolant, leaks of fuel, etc. Also check for noise and vibrations.