LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Crank Sprocket >> Removal

Crank Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the V-belts. < Ref. to REMOVAL , V-belt. >
  2. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  3. Remove the timing belt cover. < Ref. to REMOVAL , Timing Belt Cover. >
  4. Remove the timing belt. < Ref. to REMOVAL , Timing Belt. >
  5. Remove the crank sprocket.
    Fig 1: Aligning Crank Sprocket Marks
    G04997667Courtesy of SUBARU OF AMERICA, INC.