Enable Condition
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine coolant temperature | ≥ 75°C (167°F) |
| Battery voltage | ≥ 10.9V |
| Atmospheric pressure | > 75.1 kPa (563 mmHg, 22.2 inHg) |
| Fuel level | ≥ 9.6 l (2.54 US gal, 2.11 Imp gal) |
| After engine starting | 10 seconds or more |
| Feedback in ISC | In operation |
| Lambda value (left and right) | 0.9 ←→1.1 |
| After air condition switching ON-OFF, OFF-ON | 5.1 seconds or more |
| After intake manifold pressure changes more than 4 kPa (30 mmHg, 1.2 inHg). | > 5.1 sec. |
| After neutral switch ON/OFF change | > 5.1 sec. |
| Vehicle speed | 0 km/h (0 MPH) |