Enable Condition
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic enable condition is established if the radiator fan changes from OFF →ON when all of the conditions below are met.
When one of the conditions below is not met, the diagnostic enable condition is not established.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| Engine speed | 500 - 900 RPM |
| Idle switch | ON |
| Vehicle speed | < 2 km/h (1 MPH) |
| Battery voltage | ≥ 10.9 V |