LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0340 Camshaft Position Sensor "A" Circuit (Bank 1 Or Single Sensor) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

If a condition where the number of camshaft position sensor signals for 2 engine revolutions is not 3 times, continues for more than 3 seconds.

Judge as OK and clear the NG when the following criteria are not established.

Judgment Value 

JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Amount of camshaft sensor signal during 2 revs. 3

Time Needed for Diagnosis:  4 engine revs.

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK and clear the NG when the malfunction criteria below are met.

Judgment Value 

JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Camshaft position sensor signal = 3