LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0335 Crankshaft Position Sensor "A" Circuit >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Judge as NG when the continuous time of completing the malfunction criteria below becomes more than 3 seconds.

Judgment Value 

JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Starter switch ON
Crankshaft position sensor signal Not detected
Battery voltage ≥8V

Time Needed for Diagnosis:  3 seconds

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.

Judge as OK when the continuous time while meeting the malfunction criteria below is 3 seconds or more.

Judgment Value 

JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Crankshaft position sensor signal Input exists
Battery voltage ≥8V