Enable Condition
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| All secondary parameters enable conditions | 1 second or more |
| Intake manifold pressure change at 120°CA | <20kPa(150 mmHg, 5.9 inHg) |
| Throttle position change during 16 milliseconds | <20° |
| Fuel shut-off function | Not in operation |
| Fuel level | ≥ 9.6 l (2.54 US gal, 2.11 Imp gal) |
| Vehicle dynamic control or AT torque control | Not in operation |
| Evaporative system leak check | Not in operation |
| Engine speed | 400 - 7000 RPM |
| Intake manifold pressure | > Value of Map 3 or more |
| Battery voltage | ≥8V |
| Atmospheric pressure | ≥ 75.0 kPa (563 mmHg, 22.17 inHg) |
| Fuel parameter determination | Not extremely low volatility |
Map 3
ATMOSPHERIC PRESSURE SPECIFICATIONS
| RPM | 700 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 | 4000 | 4500 | 5000 | 5500 | 6000 | 6500 | 7000 |
| kPa (mmHg, inHg) | 26.7 (200.0, 7.87) | 26.7 (200.0, 7.87) | 24.0 (180.0, 7.09) | 24.1 (181.0, 7.13) | 24.3 (182.0, 7.17) | 24.7 (185.0, 7.28) | 28.3 (212.3, 8.36) | 30.9 (232.1, 9.14) | 32.9 (247.0, 9.72) | 33.1 (248.0, 9.76) | 34.3 (257.0, 10.12) | 38.1 (286.0, 11.26) | 41.9 (314.0, 12.36) | 48.9 (367.0, 14.45) |