LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Diagnostic Trouble Code (DTC) Detecting Criteria (H6DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0026 Intake Valve Control Solenoid Circuit Range/Performance (Bank 1) >> Outline Of Diagnosis

Outline Of Diagnosis

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Judge as NG with either Low NG or High NG.

A variable valve lift diagnosis oil pressure switch is installed for diagnosis. It is possible to determine whether the intake valve is in high mode (increase the amount of lift) or in low mode (suppressing the amount of lift) when the variable valve lift diagnosis oil pressure switch is turned ON or OFF.

VARIABLE VALVE LIFT DIAGNOSIS

Oil switching solenoid valve duty Intake valve Variable valve lift diagnosis oil pressure switch
Large High mode ON
Minimum Low mode OFF

When the variable valve lift diagnosis oil pressure switch remains OFF even though the intake valve tried to enter high mode (oil switching solenoid valve duty is large), this is judged as a Low NG.

When the variable valve lift diagnosis oil pressure switch remains ON even though the intake valve tried to enter low mode (oil switching solenoid valve duty is small), this is judged as a High NG.