Diagnostic Method
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
Judge as NG when the camshaft sensor input position is not within the normal range.
- Abnormality Judgment
Judge as NG when the continuous time of completing the malfunction criteria below becomes 20 seconds or more.
Judgment Value
MALFUNCTION CRITERIA
| Malfunction Criteria | Threshold Value |
|---|---|
| Judgment Value | |
| Camshaft input position | < BTDC 32°CA or > BTDC 68°CA |
Time Needed for Diagnosis: 20 seconds
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.
- Normality Judgment
Judge as OK and clear the NG when the continuous time with the following criteria established is more than 1 second.
Judgment Value
MALFUNCTION CRITERIA
| Malfunction Criteria | Threshold Value |
|---|---|
| AVCS control | Not in operation |
| Amount of AVCS target timing advance | 0°CA |
| Camshaft input position | ≥ BTDC 32°CA and ≤BTDC 68°CA |