LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Lubrication (H6DO)) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  3. Lift-up the vehicle.
  4. Remove the under cover.
  5. Disconnect the terminal from oil pressure switch.
    Fig 2: Locating Oil Pressure Switch Terminal
    G05018941
  6. Remove the oil pressure switch.
    Fig 3: Locating Oil Pressure Switch
    G05018942
scientia non olet · About LEMON Manuals