Oil Pressure Switch: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket

Three bond 1324 (Part No.004403042) or equivalent

Fig 1: Identifying Liquid Gasket Applying Position On Oil Pressure Switch Threads
Install the oil pressure switch.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Locating Oil Pressure Switch
Connect the terminal of the oil pressure switch.

Fig 3: Locating Oil Pressure Switch Terminal
Install the under cover.