LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Controls - Engine (Diagnostics) (H6DO)) >> Subaru Select Monitor >> Operation >> V.I.N. Registration

V.I.N. Registration

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select {V.I.N. Registration} and press the [YES] key.
  5. Perform the procedures shown on the display screen.
    NOTE: For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals