LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Engine Controls - Engine (Diagnostics) (H6DO)) >> Drive Cycle >> Procedure >> Drive Cycled >> Drift Diagnosis

Drift Diagnosis

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F).
  2. Check that the battery voltage is more than 10.9 V and that more than 9.6 (2.5 US gal, 2.1 Imp gal) of fuel remains.
  3. Make sure that the engine coolant temperature rises for more than 10°C (50°F) from the level of engine starting and is also above 75°C (167°F).
  4. Idle the engine for more than 120 seconds in the condition of step  3.