DTC P2229 Barometric Pressure Circuit High
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTING CONDITION:
- Immediately at fault recognition
- GENERAL DESCRIPTION < Ref. to DTC P2229 BAROMETRIC PRESSURE CIRCUIT HIGH , Diagnostic Trouble Code (DTC) Detecting Criteria. >
CAUTION:
After repair or replacement of faulty parts, perform Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode. > and Inspection Mode < Ref. to
PROCEDURE , Inspection Mode. >.
DTC P2229 BAROMETRIC PRESSURE CIRCUIT HIGH - DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK FOR ANY OTHER DTC ON DISPLAY. | Is DTC P1111 displayed on the Subaru Select Monitor or general scan tool? | Replace the ECM. < Ref. to
ENGINE CONTROL MODULE (ECM)
. >
NOTE:
The atmospheric pressure sensor is built into the ECM.
|
Temporary poor contact occurs. |