Data Link Connector: Note
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
This connector is used for Subaru Select Monitor.
CAUTION:
Do not connect any scan tools except Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.
DATA LINK CONNECTOR TERMINALS REFERENCE
| Terminal No. | Remarks | Terminal No. | Remarks |
|---|---|---|---|
| 1 | Power supply | 9 | Empty |
| 2 | Empty | 10 | Subaru Select Monitor signal |
| 3 | Empty | 11 | Empty |
| 4 | Empty | 12 | Ground |
| 5 | Empty | 13 | Ground |
| 6 | Empty | 14 | Empty |
| 7 | Empty | 15 | Empty |
| 8 | Empty | 16 | Empty |