LH Side

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Remove the battery and battery carrier.
Remove the bracket.
Disconnect the connector from ignition coil.
Remove the ignition coil.
NOTE: Turn the #6 ignition coil to remove it.

Fig 1: Identifying Bracket And Connector (Left Side)
Courtesy of SUBARU OF AMERICA, INC.
Remove the spark plug with a spark plug socket.

Fig 2: Removing Spark Plug Using Spark Plug Socket
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Identifying Spark Plug Socket Wrench With Associated Components
Courtesy of SUBARU OF AMERICA, INC.