Rear Exhaust Pipe: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Separate the rear exhaust pipe from front exhaust pipe.
CAUTION: Be careful, exhaust pipe is hot.

Fig 1: Locating Bolts Installing Front Exhaust Pipe To Rear Exhaust Pipe
Separate the rear exhaust pipe from muffler.
CAUTION: Be careful not to pull down the rear exhaust pipe.
- LH side
  
  Fig 2: Locating Rear Exhaust Pipe Bolts (LH)
- RH side
  
  Fig 3: Locating Rear Exhaust Pipe Bolts (RH)
Apply a coat of spray type lubricant to the mating area of cushion rubber.
Remove the rear exhaust pipe bracket from cushion rubber.

Fig 4: Locating Rear Exhaust Pipe Bracket