Section 61 (Exhaust (H6DO)): Muffler: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Separate the muffler from rear exhaust pipe.
CAUTION: Be careful, exhaust pipe is hot.
- LH side
  
  Fig 1: Locating Muffler Bolts (LH)
- RH side
  
  Fig 2: Locating Muffler Bolts (RH)
Apply a coat of spray type lubricant to the mating area of cushion rubber.
- LH side
  
  Fig 3: Locating Cushion Rubber (LH)
- RH side
  
  Fig 4: Locating Cushion Rubber (RH)
Remove the front and rear cushion rubber, and then remove the muffler.