Section 60 (Emission Control (Aux. Emission Control Devices) (H6DO)): Canister: Installation

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Check that there is no damage or dust on the quick connector. If necessary, clean the seal surface of the pipe.

Tightening torque:

8.0 N.m (0.82 kgf-m, 5.9 ft-lb)

Fig 1: Locating Canister With Mounting Bolts