LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel Injection (Fuel Systems) (H6DO)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
    Fig 2: Identifying Manifold Absolute Pressure Sensor And Filter Assembly
    G05018450
  4. Remove the manifold absolute pressure sensor from intake manifold.
scientia non olet · About LEMON Manuals