LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel Injection (Fuel Systems) (H6DO)) >> Fuel Injector >> Removal >> RH Side

RH Side

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  5. Remove the air cleaner case. < Ref. to REMOVAL , Air Cleaner Case. >
  6. Remove the fuel pipe protector RH.
    Fig 2: Locating Fuel Pipe Protector RH Bolts
    G05018455
  7. Disconnect the connector from fuel injector.
    Fig 3: Locating Fuel Injector Connector
    G05018456
  8. Remove the engine harness from fuel injector pipe RH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 4: Locating Bolts Holding Fuel Injector Pipe Onto Intake Manifold
    G05018411
  10. Remove the fuel injector while lifting up the fuel injector pipe.