LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel Injection (Fuel Systems) (H6DO)) >> Fuel Injector >> Removal >> LH Side

LH Side

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Remove the battery.
  5. Remove the generator harness from fuel pipe protector LH.
  6. Remove the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector LH Bolts
    G05018408
  7. Disconnect the connector from fuel injector.
    Fig 2: Locating Fuel Injector Connector
    G05018459
  8. Remove the engine harness from fuel injector pipe LH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 3: Locating Bolts Holding Fuel Injector Pipe Onto Intake Manifold
    G05018418
  10. Remove the fuel injector while lifting up the fuel injector pipe.