RH Side

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 1: Locating Bolts Holding Fuel Injector Pipe Onto Intake Manifold

Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 2: Locating Fuel Pipe Protector RH Bolts