LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Mechanical (H6DO)) >> Timing Chain Assembly >> Removal

Timing Chain Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  2. Remove the front chain cover. < Ref. to REMOVAL , Front Chain Cover. >
  3. Remove the chain tensioner (RH).
    NOTE: Be careful not to come out the plunger (A).
    Fig 1: Locating Plunger
    G05018703
  4. Remove the chain guide (RH: between cams).
    Fig 2: Locating Chain Guide
    G05018704
  5. Remove the chain guide (RH).
  6. Remove the chain tensioner lever (RH).
    Fig 3: Locating Chain Tensioner Lever
    G05018705
  7. Remove the timing chain (RH).
  8. Remove the chain tensioner (LH).
    NOTE: Be careful not to come out the plunger.
    Fig 4: Locating Timing Chain And Chain Tensioner
    G05018706
  9. Remove the chain tensioner lever (LH).
    Fig 5: Locating Chain Tensioner Lever
    G05018707
  10. Remove the chain guide (LH: between cams).
    Fig 6: Locating Chain Guide
    G05018708
  11. Remove the chain guide (LH)
    Fig 7: Locating Chain Guide (LH)
    G05018709
  12. Remove the chain guide (center).
    Fig 8: Locating Chain Guide (Center)
    G05018710
  13. Remove the idler sprocket (upper)
    Fig 9: Locating Idler Sprocket (Upper)
    G05018711
  14. Remove the timing chain (LH).
  15. Remove the idler sprocket (lower).
    Fig 10: Locating Idler Sprocket (Lower)
    G05018712
scientia non olet · About LEMON Manuals