Special Tool
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE CHART
| ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
|---|---|---|---|
| 18250AA010 | CYLINDER HEAD TABLE |
|
|
| 18232AA000 | ENGINE STAND | Used for disassembling and assembling engine. | |
| 498497100 | CRANKSHAFT STOPPER | Used for stopping rotation of flywheel or drive plate when loosening / tightening crank pulley bolt. | |
| 18254AA000 | PISTON GUIDE | Used for installing piston in cylinder. | |
| 499585500 | VALVE OIL SEAL GUIDE | Used for press-fitting of intake and exhaust valve guide oil seals. | |
| 18253AA000 | PISTON PIN GUIDE | Used for installing piston pin, piston and connecting rod. | |
| 18350AA000 | CONNECTING ROD BUSHING REMOVER AND INSTALLER | Used for removing and installing connecting rod bushing. | |
| 499097500 | PISTON PIN REMOVER ASSY | Used for removing piston pin. | |
| 499977500 | CAM SPROCKET WRENCH | Used for removing and installing intake cam sprocket. | |
| 18231AA020 | CAM SPROCKET WRENCH | Used for removing and installing exhaust cam sprocket. | |
| 499587200 | CRANKSHAFT OIL SEAL INSTALLER |
|
|
| 499597100 | CRANKSHAFT OIL SEAL GUIDE |
|
|
| 499718000 | VALVE SPRING REMOVER | Used for removing and installing valve spring. | |
| 18251AA040 | VALVE GUIDE ADJUSTER | Used for installing valve guides. | |
| 499765700 | VALVE GUIDE REMOVER | Used for removing valve guides. | |
| 499765900 | VALVE GUIDE REAMER | Used for reaming valve guides. | |
| 499977100 | CRANK PULLEY WRENCH | Used for stopping rotation of crank pulley when loosening/tightening crank pulley bolt. | |
| 18252AA000 | CRANKSHAFT SOCKET | Used for rotating crankshaft. | |
| 498547000 | OIL FILTER WRENCH | Used for removing and installing oil filter. | |
| 18482AA010 | CARTRIDGE | Troubleshooting for electrical system. | |
| 22771AA030 | SUBARU SELECT MONITOR KIT | Troubleshooting for electrical system. | |
| 18233AA000 | PISTON PIN SNAP RING PLIERS | Used for removing and installing snap ring of piston pin. | |
| 498277200 | STOPPER SET | Used for installing automatic transmission assembly to engine. | |
| 42099AE000 | CONNECTOR REMOVER | Used for disconnecting quick connector of the engine compartment. |