LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Engine Mechanical (H6DO)) >> Cylinder Block >> Disassembly

Cylinder Block: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Crankshaft Assembly Components
G05018807
  1. Remove the connecting rod cap.
  2. Remove the connecting rod bearing.
    NOTE: Arrange the removed connecting rod, connecting rod cap and bearing in order, to prevent confusion.
  3. Remove the piston rings using piston ring expander.
  4. Remove the oil ring by hand.
    NOTE: Arrange the removed piston rings in good order to prevent confusion.
  5. Remove the snap ring.
scientia non olet · About LEMON Manuals