LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake (Induction) (H4DOTC) >> Intercooler >> Removal

Intake (Induction) (H4DOTC): Intercooler: Removal

  1. Remove the collector cover.
  2. Loosen the clamp and remove the air bypass pipe (A) from the air bypass valve.
  3. Loosen the clamp, and then remove the intake duct (B) from the intercooler.
    Fig 1: Identifying Air By-Pass Pipe
    G05017979
  4. Remove the bolts which secure the intake duct to the turbocharger.
  5. Remove the bolts which secure the intercooler to the bracket, and remove the intercooler.
    Fig 2: Locating Intercooler To Bracket Bolts
    G05017980
    Fig 3: Locating Intercooler To Bracket Bolts
    G05017981