Rear Exhaust Pipe: Installation

Apply a coat of spray type lubricant to the mating area of cushion rubber.
Install the rear exhaust pipe bracket to cushion rubber.

Fig 1: Locating Rear Exhaust Pipe Bracket
Install the rear exhaust pipe to both mufflers.
NOTE: Use a new gasket.

Tightening torque: 48 N.m (4.9 kgf-m, 35.4 ft-lb)

Fig 2: Locating Rear Exhaust Pipe Nuts
Install the rear exhaust pipe to center exhaust pipe.
Tightening torque: 18 N.m (1.8 kgf-m, 13.3 ft-lb)

Fig 3: Locating Rear Exhaust Pipe Nuts
Lower the vehicle.