LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after {ABS} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select {Clear Memory} and press the [YES] key.
    DIAGNOSIS PROCEDURE

    Display Contents to be monitored
    Clear Memory? DTC deleting function
  5. When "Done" and "Turn ignition switch OFF" is shown on the display screen, turn the Subaru Select Monitor and ignition switch OFF.
NOTE: For details concerning the operation procedure, refer to the "Subaru Select Monitor Operation Manual".
scientia non olet · About LEMON Manuals